Monday, February 18, 2008

Project Tutorial - Altered Paint Can


Altered Paint Can

Supplies List:

Paint can (can buy new at hardware store)
Paint can opener
Pattern paper
Modge Podge
Glue lines/glue dots
Foam Stamps
Ink pad
Paint
Embellishments
Fibers/Twill
Alcohol inks

1. Cut pattern paper to fit your can to your liking.
2. Do any rubber or foam stamping now (i.e. the Title on the can) on your pattern paper before you adhere it to the can, makes for a better stamping surface.
3. I inked all the edges of my paper.
4. Now on my can I wanted a color coordinated twill and didn’t have any, so I used the same paint as I used for the foam stamping and painted the twill. Let dry.
5. Use a paint brush and apply a coat of modge podge - one section at a time – to the can, I also painted a touch of modge podge onto the ends of the paper – where it will need more glue to hold it down while drying. I then adhered the paper to the can, holding the edges down for a bit while the glue started to set up. I then repeated for the rest of the papers. Let this all dry.
6. I then painted a thin coat of modge podge over the top of the papers all the way around the can to finish it off. Let dry.
7. I used Glue Lines to adhere the twill to the can.
8. I used 1 inch glue lines in a couple of spots at the top of the can to adhere the funky fibers. I ran two strands of funky fibers to give lots of umph to them.
9. I used alcohol inks to color my can opener and hung it from the handle of the paint can.
10. I painted some small blocks using the same paint as above and adhere with glue dots to the top of the can.
11. I then tied off on one end, wrapped a bunch of fibers around the handle of the can, then tied off the other end.

Have fun!
Debbie Weller
A.K.A. DebDuzScrappin

Sunday, February 17, 2008

Project Tutorial - Altered Nut Can - Clock

This is a fun project, I used an old nut can I had laying around the house, but you could easily stop by Home Depot and pick up a new paint for just a couple of bucks, they have 2 different sizes. On my particular can, I added a working clock, which I got in my monthly kit from Club Stamp. All rubberstamps and paper are from Club Stamp on this project.

List of Supplies:

Can
Red line tape
Fabric scraps or ribbons
Various ink pads
Various rubberstamps

1. Now on my particular can, I added the clock. If you decide to do a clock, make sure and get a fairly fat can, mine was pretty narrow and it was difficult to fit my clock in, and had to sort of bend the can a bit to get it to fit. I definitely recommend the large paint can from Home Depot instead. I had hubby drill me a hold to fit the clock mechanism through. I decorated the can as follows and then lastly inserted the clock mechanism.
2. Measure your can and cut paper to fit perfectly around the can and overlap at any seam but oh a ½” or so.
3. Rubberstamp images in various colors all over the background paper.
4. I prefer two or three different colors of paper to help break up and give character to my project. Attached finished papers to the can using the red line tape. I tried other adhesives and this one seemed to really hold for me.
5. If your can doesn’t have a handle and you want one, get some heavy duty wire and attach to your can. I did this and added a few beads at each end.
6. Cut color coordinated fabric scraps (or ribbons) into 3-4 in x 1 in pieces. Tie onto the handle, alternating colors.
7. You can also embellish can with beaded trim. Mine with the clock didn’t allow for enough space for the trim.

Have fun!
Debbie Weller
A.K.A. DebDuzScrappin

Sunday, February 10, 2008

Scrapbooking 101: Easy Embellishments

Easy Embellishments

Easy, meaning you buy them pre-made. If you want to learn how to make them yourself…check out the advanced tutorials. Adding the trimmings. I call this pulling it all together! I won't go into too much detail here, but this is where I have the most fun. Your embellishments should project your original theme. They should provide the unity that connects the pieces together.

3D Stickers/Accents. You can buy these just about anywhere…Walmart, Michaels, the local scrapbook stores, etc. They are basically a couple of stickers with pop-dots in between the layers to give it the 3-dimensional look and feel. They look amazing and can be lots of fun, keeping in mind that they are not always cheap.

Shaker Boxes. These are a fun touch to a page. These are available for purchase at various places, if not locally, then check online. There is endless possibilities for making these. I won’t go into great detail on how to create, I will save that for the advanced tutorial…but here is the basics of it….You can punch out a design from a piece of paper and a piece of foam of the same size. Then using a page protector cut out a clear piece the size of your box. Now glue the top paper with designed punched out to the page protector then glue those both to the foam, carefully lining up the designs to match. Then fill up the empty foam area with little punchies, buttons, beads, whatever you like. You can just put a few or fill it entirely. Then attach a back piece, making sure that there is adhesive all the way around the design so that no beads fall out. Trim it up to that it all looks good and square. If you have a die cutter there are a ton of potential ideas. You can also rubber stamp a design in the background or use diecuts/punchies to make a design in the background...

Paper Dolls. These can be a real cute addition to your pages. They have (1) kits of them in all sorts of themes for sale, (2) templates for drawing and cutting out your own, (3)punchkins which are punches you can use to quickly punch them out of your own paper, or (4) die cut them out yourself with a sizzix out of your own paper. The paper dolls themselves come in different styles and colors. Many manufacturers provide hair, clothing and accessories for the dolls in addition to the dolls themselves. If you want to really personalize your dolls, you can create your own unique hair and clothing. Paper dolls are usually dressed either as a character doll (depicting a season, theme, etc.) or re-creating the people in the photographs themselves. Dolls can be decorated with chalks, pens, stickers, punches . . . they can be active (jumping, waving) and can really add a fun and personal touch to your layouts.

Paper Piecings. Paper Piecing is one of the latest trends gaining popularity in the scrappers portfolio. While the technique itself is not new it has only recently been officially named and recognized as such. There are companies from whom you can purchase patterns and kits. But with the internet - there are tons of free patterns available out there. Paper Piecing is simply the piecing together of different bits of paper to form designs for your pages. It is very similar to layering Die-cuts, except that you cut out all the pieces yourself. The designs may range from simple (one piece-one color) to complex (numerous pieces in various colors, shading, etc). While the finished product often looks very difficult and complex, fitting the pieces together is really very easy- a task that even the most un-artistic person can complete. Paper Piecing can be any size or color needed to fit or match with your page. The same papers that are used in the layout, can be used in the Paper Piecing, creating a continuity that is not available in other mediums. Paper Piecing is relatively inexpensive and a great way to use up scraps of paper. The only tools you really need for Paper Piecing are a good set of small scissors and a pattern. Creating patterns yourself is easy, and this opens up a whole new world of piecing possibilities. A pattern can be created from almost anything - children's books, rubber stamps, cross-stitch and tole painting patterns, coloring books, clip art, stickers, or even the photos themselves. Although creating your own pattern may be a little more work, you save on the cost of purchasing a pattern, and have a one-of-a-kind piece for your page.

Paper Wisps. One of the simplest and least expensive ways to add some dimension and interest to your pages is with paper wisps - long strips of paper cut so thinly that they curl. These little strips of paper can add such a unique look to your layouts, and they are so easy to make. You can use the same paper as in your layout as well - so they are always a perfect match. You can cut paper wisps one of two ways - either with your paper trimmer, or with an xacto knife and cutting mat. Many different factors will effect how much the paper wisp will curl; speed, direction of the cut, type of paper, etc. If you are not able to get a strip as curly as you would like it, try wrapping it gently around a pencil. The thinner the cut, the more it will curl on its own. Use paper wisps anywhere you would draw in lines. Strings on balloons, a fishing rod, the handle of a bag, the antenna of an insect, laundry line, Easter grass - there are so many possibilities.

Shrinky dinks. You can buy the shrinky dink material at most craft stores like Joann Fabrics. You can rubber stamp designs on them and cut out, or use a punch/die cutter and punch out a design and then color it. Once you have your design cut out and colored. Punch a hole in the material, this way you can tie a ribbon or string on it and hang it like a charm on your page. Once the hole is punched, then using a stylus or something similar keep a hold of the item while using your embossing heat gun and the little thing will shrink right up and make an adorable embellishment for your page. You can also just glue directly onto your page rather than hanging as a charm.

Saturday, February 9, 2008

Scrapbooking 101: Paper tearing and pocket pages....

Simple Techniques

Paper Tearing. One of the simplest techniques in scrapbooking is paper tearing. It requires no tools, and it is fast and easy. If you are unfamiliar with paper tearing, it is just what it sounds like - the tearing of paper. Paper tearing can take a number of forms on your pages; backgrounds, borders, images, lettering, pretty much anything. If you haven't experimented with paper tearing before, your background layout is a very good way to start. Torn paper adds a very unique look to snow or beach layouts with really no work at all.Take your cardstock (cardstock is easier to tear than the thinner printed paper) and holding it flat against a table with one hand - start at the edge and slowly pull the paper up with the other hand. It take a little practice to get the paper to tear in a straight line - but the uneven edges are really what gives paper tearing its charm. You will be amazed at how quickly you can complete your pages. Torn paper also looks great as the entire background. Take a look at your photographs - often there are layers in the picture itself that can be easily duplicated with paper. Another very simple way to incorporate torn edges into your layout, is in your lettering. The torn and layered letters are simple to create, yet they tend to really stand out, making your layout more memorable. If you used torn paper in your background, layering torn paper into you letters is a great way to tie your titles into the look and theme of your page. Torn paper also works great to border or frame your photographs. The uneven edges of torn paper add a rustic, country look.

Pocket Pages. Pocket pages are a wonderful way to store loose memorabilia in your scrapbooks. They can be used for holding birthday cards, wedding announcements, kids art work, maps, brochures, menus, valentines, and programs from plays and recitals. Patterned paper is usually not sturdy enough for pocket pages. If you want to use lightweight patterned paper, mount it on cardstock first. The adhesive you use for pocket pages should be heavy duty.

Project Tutorial - Rubberstamped Candles

Great gift idea. I would pick up a tiered set of three matching candles at Walmart to make great gift sets for the holidays. You can find nice roughly 6 inch white candles for right at $1, so it makes relatively cheap but beautiful handmade gifts.

List of Supplies:

White candle
White tissue paper
Glue stick
Wax paper
Various ink pads
Various rubberstamps

NOTE: I highly recommend practicing first on a small candle – fairly easy once you get the hang of it.

1. Rubberstamp images onto white tissue paper.
2. Cut out image fairly close to edges of image.
3. Put just a touch of glue from glue stick on the candle where you’d like the image to be located. This will help hold the image in place while we go to the next step.You can either put all the images on or put them on as you go – whichever you prefer.
4. Then take the wax paper (if you use your finger nail and scratch the wax paper, you can find the side that is ‘waxiest’ and place that side against the candle, don’t fret tho if you can’t really tell, either side works) and put it over the image you intend to melt into the candle and use the heat gun to carefully melt the wax from the wax paper onto the image on the candle, you will see the image and tissue paper change color and sort of melt into the candle.
5. When you take the wax paper off – if there is spots of tissue showing – just reheat with heat gun a little and carefully tap with finger (it will be HOT wax) and it will disappear.

Have fun!
Debbie Weller
A.K.A. DebDuzScrappin

Friday, February 8, 2008

Scrapbooking 101: Tools of the Trade

Paper trimmer. I can’t live without mine. I actually own 3 of them. I own a small one for trimming photos, and small items; a large one with a swing out arm for trimming up 12x12 paper; and a heavy duty large one for cutting large paper and mat board. You can buy these at walmart, your local scrapbook store, or even office supply stores.

Scissors. I own a bunch of these. You need standard ones, and definitely tiny ones for detail work. The sharper the better, makes for a nice clean cut everytime.

Exacto Knife & Mat. These are not a requirement by any means, but useful. I use mine when I cut out items when I have printed them or used templates to draw them. They work better than scissors in teeny tiny spots.

Punches. You can buy a ton of different punches and punch out design or use the punchies themselves to decorate pages. There is also a ton of punchart designs you can create using various punchies. If you don’t want to invest in the punch themselves, you can get on ebay and buy just about anything you want – already punched out. Very cheap and convenient. There is also swap groups you can join online to swap punchies.

Die cutters. You can buy diecuts already made up in packages at the store for different themes. Or better yet, there is also a few different personal die cutting machines available for purchase. A couple of the most commonly known ones are the Sizzix & Quikutz die cutters. There are tons of different full alphabet fonts in addition to 1000's of shapes. The systems to buy are not cheap to buy of course...but sure is fun to use and allows you lots of versatility. Now many of the local scrapbook stores have a machine or similar with dies and you can cut for free as long as you buy your paper from the store. This is a nice way to go if offered where you live and shop. Once again there is many online folks interesting in swapping die cuts as well.

Decorative scissors. The are a ton of these in all different patterns. You can use them to trim photos, mats, make borders, toppers, etc. Some decorative scissors can make up to 8 different borders.

Templates. EK Success, Coluzzle and a few others make some great templates that allow you more flexibility in creating embellishments to color coordinate with your layouts. They take a little practice, but can be a great investment.

Thursday, February 7, 2008

Scrapbooking 101: Toppers/Titles/Borders

Do you like to have creative pages, but don't have the time to plan layouts?? Do you like punched pieces or stickers, but don't know how to place them on your pages?? A very simple but creative way to plan your layouts is using page toppers/titles/borders.

Toppers/titles/borders look great on pages, whether they are vertical, horizontal or

diagonal; they work for single or double page spreads. Not only are they quick and easy to create, but once in place, you really only need to add your photos and journaling to have a completed page. What could be simpler?

Toppers and Titles are generally located at the top of the page with lettering that describes the layout. Borders generally have just a design or are embellished and run vertically or horizontally. You can also create your own borders by repeating a single punch, stamp or clip art image. Sticker modules are also great to create borders.

Tip - When you are using punches from the same colors as you are matting your border with, punch your shapes from the mat itself. Make sure you are in far enough that the holes will be covered by the border. This way you also maximize the use of your paper too.

LinkWithin

Related Posts Widget for Blogs by LinkWithin