ClubScrap Quad Prints - Quilt cards

 Todays post is using ClubScrap's Quad Prints.  This is the one I used for these two cards.

Cut it up into four pieces.  Then cut each panel in 3/4 in wide strips.

Punch a square and place it in the center of the card.  Then start adhering the strips as shown.

 Trim the strips around the card as you go.

 Here is the final card.

For this card - I did, what they call 'Flying geese' pattern:

 Here is the final card:

The majority of the materials used in this project are from ClubScrap. TFL DebDuzScrappin