Tuesday, August 31, 2010

Cards - Arts & Crafts GTG #6

On this GTG card, I rubberstamped the background using the unmounted Font sheet. Attached one of the pre-printed images in the center of the card in the opening.

So luv the little metallic brads in this kit - excellent for just a tiny extra embellishment!

The majority of the materials used in this project are from ClubScrap. TFL DebDuzScrappin

Sunday, August 29, 2010

Cards - Arts & Crafts GTG #5

More watercoloring on this stamped image again from the Arts & Crafts GTG kit.

The majority of the materials used in this project are from ClubScrap. TFL DebDuzScrappin

Friday, August 27, 2010

Cards - Arts & Crafts GTG #4

I watercolored this stamped image and added layered 3D pieces of the leaves along the stem.

The majority of the materials used in this project are from ClubScrap. TFL DebDuzScrappin

Wednesday, August 25, 2010

Cards - Arts & Crafts GTG #3

Another card from the Arts & Crafts GTG collection.

The majority of the materials used in this project are from ClubScrap. TFL DebDuzScrappin

Monday, August 23, 2010

Cards - Arts & Crafts GTG #2

On this card - I watercolored the background and the flower. I stamped to images of the flower and trimmed out the second one and placed it 3D like on a popdot over the original stamped flower image.

The majority of the materials used in this project are from ClubScrap. TFL DebDuzScrappin

Sunday, August 22, 2010

Cards - Flippin' Weaved Technique VIDEO TUTORIAL




Hey gang

Well I thought I would try my hand at a video tutorial for this project. I really don't know what I am doing - so it is pretty rough, but check it out, and let me know what you think. I made another one, but still need to edit it before I can post it.

Supply list:
8x8 Cardstock
(2)8x1-15/16 cardstock
Rubberstamps (Club Scrap)
Ink
Embellishments
Bone folder

Instructions:
1. Score lines on 8x8 at 2in, 4in, and 6in. Fold on score lines and reinforce with Bone folder.
2. While in half, mark a 2 inch line from center fold to next fold line at 2in, 4in and 6in. Cut with straight edge or scissors.
3. Open up and weave the 2 thin strips into the cut lines.
4. Embellish card with sayings, images, cut outs, etc.

The majority of the materials used in this project are from ClubScrap. TFL DebDuzScrappin

Saturday, August 21, 2010

Cards - Arts & Crafts GTG #1

This is one of the cards from ClubStamp's Arts & Crafts Greetings to go kit.

The majority of the materials used in this project are from ClubScrap. TFL DebDuzScrappin

Thursday, August 19, 2010

Gift card holder - Multiple gift cards #6

Gift card holder - Version 1

Instructions

1. Cut a piece of cardstock 6x12. Score a line horizontally at 2 inches from the bottom. Score 3 lines vertically every 3 inches (3in, 6in, 9in).

2. Fold on all the score lines, and reinforce the fold lines.

3. Using a circular punch, punch a half circle in the center of each of the 3 in sections (the folded up 2 inch bottom part).

4. Ink all of the edges of the entire piece.

5. Using a stapler, staple on the fold lines at 3in, 6in, 9in creating the pockets which will keep the gift cards stablized and in place.

6. Using a circular punch, punch 2 color coordinating circles, fold in half. Adhere to the left and right edges of the bottom holder, to create a closure, so the gift cards don't fall out.

7. Rubberstamp sentiment at the top of each pocket.

8. Using a japanese punch, punch two small holes a the center of the project (at the 6in fold), one hole on each side of the fold just above the lower pocket. Thread some ribbon through these two holes to create the tying closure for the holder.

9. Embellish the front as desired.

10. Insert your gift cards.

11. Create a 4.5x3.25 matching envelope if desired.

Thanks for looking. Good luck and happy Scrappin'.

The majority of the materials used in this project are from ClubScrap. TFL DebDuzScrappin

Tuesday, August 17, 2010

Gift card holder - Multiple gift cards #5

Gift card holder - Version 5

Instructions

1. Cut a piece of cardstock 6x12. Score a line horizontally at 2 inches from the bottom. Score 3 lines vertically every 3 inches (3in, 6in, 9in).

2. Fold on all the score lines, and reinforce the fold lines.

3. Using a circular punch, punch a half circle in the center of each of the 3 in sections (the folded up 2 inch bottom part).

4. Ink all of the edges of the entire piece.

5. Using a stapler, staple on the fold lines at 3in, 6in, 9in creating the pockets which will keep the gift cards stablized and in place.

6. Using a circular punch, punch 2 color coordinating circles, fold in half. Adhere to the left and right edges of the bottom holder, to create a closure, so the gift cards don't fall out.

7. Rubberstamp sentiment at the top of each pocket.

8. Using a japanese punch, punch two small holes a the center of the project (at the 6in fold), one hole on each side of the fold just above the lower pocket. Thread some ribbon through these two holes to create the tying closure for the holder.

9. Embellish the front as desired.

10. Insert your gift cards.

11. Create a 4.5x3.25 matching envelope if desired.

Thanks for looking. Good luck and happy Scrappin'.

The majority of the materials used in this project are from ClubScrap. TFL DebDuzScrappin

Sunday, August 15, 2010

Gift card holder - Multiple gift cards #4

Gift card holder - Version 4

Instructions

1. Cut a piece of cardstock 6x12. Score a line horizontally at 2 inches from the bottom. Score 3 lines vertically every 3 inches (3in, 6in, 9in).

2. Fold on all the score lines, and reinforce the fold lines.

3. (optional) I skipped this on this example. Using a circular punch, punch a half circle in the center of each of the 3 in sections (the folded up 2 inch bottom part).

4. Ink all of the edges of the entire piece.

5. Using a stapler, staple on the fold lines at 3in, 6in, 9in creating the pockets which will keep the gift cards stablized and in place.

6. Using a circular punch, punch 2 color coordinating circles, fold in half. Adhere to the left and right edges of the bottom holder, to create a closure, so the gift cards don't fall out.

7. Rubberstamp sentiment at the top of each pocket.

8. Using a japanese punch, punch two small holes a the center of the project (at the 6in fold), one hole on each side of the fold just above the lower pocket. Thread some ribbon through these two holes to create the tying closure for the holder.

9. Embellish the front as desired.

10. Insert your gift cards.

11. Create a 4.5x3.25 matching envelope if desired.

Thanks for looking. Good luck and happy Scrappin'.

The majority of the materials used in this project are from ClubScrap. TFL DebDuzScrappin

Friday, August 13, 2010

Gift card holder - Multiple gift cards #3

Gift card holder - Version 3

Instructions

1. Cut a piece of cardstock 6x12. Score a line horizontally at 2 inches from the bottom. Score 3 lines vertically every 3 inches (3in, 6in, 9in).

2. Fold on all the score lines, and reinforce the fold lines.

3. Using a circular punch, punch a half circle in the center of each of the 3 in sections (the folded up 2 inch bottom part).

4. Ink all of the edges of the entire piece.

5. Using a stapler, staple on the fold lines at 3in, 6in, 9in creating the pockets which will keep the gift cards stablized and in place.

6. Using a circular punch, punch 2 color coordinating circles, fold in half. Adhere to the left and right edges of the bottom holder, to create a closure, so the gift cards don't fall out.

7. Rubberstamp sentiment at the top of each pocket.

8. Using a japanese punch, punch two small holes a the center of the project (at the 6in fold), one hole on each side of the fold just above the lower pocket. Thread some ribbon through these two holes to create the tying closure for the holder.

9. Embellish the front as desired.

10. Insert your gift cards.

11. Create a 4.5x3.25 matching envelope if desired.

Thanks for looking. Good luck and happy Scrappin'.



The majority of the materials used in this project are from ClubScrap. TFL DebDuzScrappin

Wednesday, August 11, 2010

Gift card holder - Multiple gift cards #2

Gift card holder - Version 2

Instructions

1. Cut a piece of cardstock 6x12. Score a line horizontally at 2 inches from the bottom. Score 3 lines vertically every 3 inches (3in, 6in, 9in).

2. Fold on all the score lines, and reinforce the fold lines.

3. Using a circular punch, punch a half circle in the center of each of the 3 in sections (the folded up 2 inch bottom part).

4. Ink all of the edges of the entire piece.

5. Using a stapler, staple on the fold lines at 3in, 6in, 9in creating the pockets which will keep the gift cards stablized and in place.

6. Using a circular punch, punch 2 color coordinating circles, fold in half. Adhere to the left and right edges of the bottom holder, to create a closure, so the gift cards don't fall out.

7. Rubberstamp sentiment at the top of each pocket.

8. Using a japanese punch, punch two small holes a the center of the project (at the 6in fold), one hole on each side of the fold just above the lower pocket. Thread some ribbon through these two holes to create the tying closure for the holder.

9. Embellish the front as desired.

10. Insert your gift cards.

11. Create a 4.5x3.25 matching envelope if desired.

Thanks for looking. Good luck and happy Scrappin'.

The majority of the materials used in this project are from ClubScrap. TFL DebDuzScrappin

Monday, August 9, 2010

Gift card holder - Multiple gift cards #1



Gift card holder - Version 1

Instructions

1. Cut a piece of cardstock 6x12. Score a line horizontally at 2 inches from the bottom. Score 3 lines vertically every 3 inches (3in, 6in, 9in).

2. Fold on all the score lines, and reinforce the fold lines.

3. Using a circular punch, punch a half circle in the center of each of the 3 in sections (the folded up 2 inch bottom part).

4. Ink all of the edges of the entire piece.

5. Using a stapler, staple on the fold lines at 3in, 6in, 9in creating the pockets which will keep the gift cards stablized and in place.

6. Using a circular punch, punch 2 color coordinating circles, fold in half. Adhere to the left and right edges of the bottom holder, to create a closure, so the gift cards don't fall out.

7. Rubberstamp sentiment at the top of each pocket.

8. Using a japanese punch, punch two small holes a the center of the project (at the 6in fold), one hole on each side of the fold just above the lower pocket. Thread some ribbon through these two holes to create the tying closure for the holder.

9. Embellish the front as desired.

10. Insert your gift cards.

11. Create a 4.5x3.25 matching envelope if desired.

Thanks for looking. Good luck and happy Scrappin'.

The majority of the materials used in this project are from ClubScrap. TFL DebDuzScrappin

Sunday, August 8, 2010

Gift card holder - Multiple gift cards

Well I had a couple of graduating nieces and a wedding coming up - all needing a lil sumptin' for a gift. After mulling things over, we settled on an assortment of giftcards. I needed to make a little holder for the cards in order to present them in a fun fashion to the recipients and this is what I came up with.

More detailed pics and instructions to come.

The majority of the materials used in this project are from ClubScrap. TFL DebDuzScrappin